Parts & Accessories
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.
The Wahoo RPM cadence sensor is your sleek little solution for measuring cycling cadence data. It is wireless, magnet-less, lightweight, and easily mounts to your bike's crank arm or to your shoe. Bluetooth Smart and ANT+ dual band technology allows you to connect to and display data on both smartphones and GPS bike computers. Collecting cadence data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - It only weighs 7 grams! - Provides accurate cadence data during your ride - (1) mount with double sided 3M tape, or (2) use the silicone sleeve and mount with zip ties. - The RPM can be worn on your shoe for spin classes or use with multiple bikes - Two LED lights show the sensor's device connection (blue) and cadence detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM cadence sensor will fit with most bikes and frame sizes
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy. - Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers. - No tangled wires on your bike to connect the sensor to your device. - The RPM speed installs easily with no magnets required - It only weighs 16.5 grams with the mount included - Provides accurate speed data during your ride - Mounts on most front wheel hub with a secure silicone casing - Two LED lights show the sensor's device connection (blue) and speed detection (red) - No charging required! Operates on a coin cell battery for up to 1 years. - RPM Speed will fit with most bikes and frame sizes
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers. - Dimensions (LxWxH): 1.25" x.75" x 1" - Weight: 7 grams (without mount) - Battery: CR2032 - Battery Life: Up to 12 months - Water Rating: IPX7 (waterproof up to 5 ft) - Wireless Signal Strength: Up to 10 feet - Note: Speed Sensor is NOT compatible with spin bikes
Allows use of two Blendr mounts on a Trek Madone SLR Blendr add-on to the Madone SLR bar/stem Mount light, computer, GPS and/or cameras to your top-of-the-line aero road bike - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Trek Madone SLR Aero Integrated handlebar - Add any accessory mount (sold separately) for an elegant, integrated look - Does not include mounting hardware
CR2450 battery for use in SIGMA computers. Compatible models: - BC 1909 - BC 2209 - BC 2209 Targa - ROX 8.0/8.1 - ROX 9.0/9.1 - ROX 5 - ROX 6 - BC 23.16 STS
- Di2 internal battery, fits all e-Tube Di2 groups - Capacity: 500 mAH (± 2000km) - Use with EW-WU101 or SC-MT800 interfaces/junction to gain BlueTooth Smart wireless connectivity for on-the-fly adjustments with smartphones and tablets - Requires SM-BCR2 charger
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Profile Design's UCM XL Universal Computer Mount provides a convenient 60mm-long place to mount your computer on your aero bars. It installs without tools, stays put and can be positioned as needed for easily viewing and controlling your computer.
The MSW Computer Spoke Magnet is designed to fit round and bladed spokes of various diameters. - Tool-free installation - Alloy construction - Fits round and bladed spokes
The K-EDGE Stem Computer mount combines the unquestionable strength of the K-EDGE aluminum mount and the proven security of CatEye’s own locking interface. This Stem mount places your CatEye computer in a safe and secure position – ideal for mountain bikes or anyone who prefers their computer above the stem. - Compatible – 1-1/8? Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded. - CatEye models compatible with this K-EDGE Mount include: - CC-RD500B “Strada Smart” - CC-GL51 “Stealth Evo+” - CC-GL50 “Stealth 50” - CC-GL11 “Stealth Evo” - CC-GL10 “Stealth 10” - CC-RD430DW “Strada Digital Wireless” - CC-RD420DW “Strada Digital Wireless” - CC-RD410DW “Strada Digital Wireless” - CC-RD400DW Strada Double Wireless” - CC-AT200W “Adventure” - CC-PD100W “Fit” - CC-RD310W “Strada Slim” - CC-RD310W “Strada Wireless Universal” - CC-RD300W “Strada Wireless” - CC-MC200W “Micro Wireless” - CC-COM10W “Commuter” - CC-PA100W “Padrone” - CC-VT200W “Velo Wireless” - CC-VT210W “Velo Wireless+” - CC-VT220W “Urban Wireless”
The K-EDGE Garmin Stem Mount is a great upgrade solution for cyclists who prefer their computer above the stem. Mounting off of the steerer tube, the mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. The fixed version is recommended for zero degree or negative degree stem angles. Can also be used with positive degree stems if additional spacers added (5mm to 10mm) above the stem. Designed with mountain biking in mind, the K-EDGE Stem mount is also ideal for much more including: cyclocross; triathlon; bike touring; or if you simply prefer this position for your computer. - Compatibly – 1-1/8" Steerer tube Diameter, Thickness (@ Steerer) – 5mm, Length (Center-to-Center) – 50mm, - Recommended for 0 Degree to Negative Degree Stem Angles - Supported Computers – Garmin Edge 20, 25, 200, 500, 510, 520, 800, 810, and Forerunner 310XT - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.
The K-EDGE Gravity Cap is a great computer mount option for those riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek computer mount. The Gravity Cap replaces your existing top cap and is ideal for Downhill, Enduro, Gravel, Touring, etc. - CNC Machined 6061-T6 Aluminum - Injection Molded Copolymer Interface - Compatibility: Wahoo ELEMNT - Lifetime Warranty - Weight: 18g - Anodized Colors: Black
An excellent choice for mountain, cross, and road cyclists who prefer to have the computer above the stem. The mount replaces a standard 5mm spacer, and is locked securely in place by the top cap compression system. - Supported Computers – Wahoo ELEMNT, Wahoo Bolt, Wahoo MINI - Compatible – 1-1/8? Steerer tube Diameter, - Thickness: 5mm, Length 50mm (Center-to-Center) - Recommended for 0 Degree to Negative Degree Stem Angles - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Copolymer Interface - Weight: 25g - Made in Boise, Idaho, USA - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded
Monitor your speed and cadence as you ride with these easy-to-install wireless sensors. With no magnets or other exposed parts to line up, these sensors are easy to install, maintain and move between bikes. The speed sensor 2 attaches to the hub of either wheel and self-calibrates with your Edge cycling computer or compatible Garmin device to give you accurate speed and distance at all times — even without a head unit. The cadence sensor 2 fastens to any size crank arm and measures pedal strokes per minute so you can get the most out of your training. Send live speed, distance and cadence data to compatible training apps or displays by using ANT+ connectivity and BLUETOOTH Low Energy technology. With both of these sensors on your bike, you can work to improve your personal best or see where you stand against the pros.
Protect your Garmin Edge 510 with a form-fitting, silicone case and keep your mind at ease. Choose from a variety of cool colors to match your personal style.
Be ready for any terrain with this Garmin Edge mountain bike mount designed specifically for bikes with short stems. It’s ideal for off-road riding when you may not want your Edge bike computer mounted in front of your handlebar.
Secure your Edge to the handlebar of your bike with Garmin's Slide-In Bike Mount. Zip ties are included.
Mount your Garmin Edge computer with the Quarter Turn Bike Mount. It includes the bike mount, rubber disc, and elastic bands to secure the Quarter Turn to your stem or handlebars.
Stay aware of approaching cars with Varia RTL515 rearview radar. It pairs with your Edge bike computer or compatible smartphone to alert you of vehicles approaching from behind up to 153 yards (140 meters) away. When used with your compatible smartphone, the Varia app uses bold graphics — plus tone and vibration alerts — to indicate the position and speed of approaching vehicles. MAXIMUM AWARENESS - Varia RTL515 rearview radar provides visual and audible alerts for vehicles approaching from behind up to 153 yards (140 meters) away. MULTIPLE PAIRING OPTIONS - This radar works seamlessly with your Edge bike computer or compatible smartphone as well as select Garmin wearables or the optional radar display unit. WORKS WITH THE VARIA APP - This smartphone app helps you increase your awareness by providing graphics — plus tone and vibration alerts — that indicate the position and speed of approaching cars. THIRD-PARTY APP COMPATIBLE - When used with a compatible smartphone, Varia radar integrates with your favorite apps, such as Ride with GPS to overlay your maps with rearview radar alerts. SUPERIOR VISIBILITY - Alert motorists to your presence as soon as possible with daylight visibility up to 1 mile. COMPACT DESIGN - Easily mount this sleek, compact device on the seatpost of almost any road-use bicycle. The vertical design allows for better leg clearance and a perfectly comfortable ride. PELOTON MODE - Varia RTL515 features multiple modes, including peloton mode, which provides a low-intensity flash that is kind to other cyclists’ eyes when riding in a group. BATTERY LIFE - Time spent charging is not as good as time spent riding. Get up to 16 hours of battery life in day flash mode and up to 6 hours in solid mode. Physical Specifications - Dimensions: 3.9” x 0.8” x 1.6" (98.6 x 19.7 x 39.6 mm) - Weight: 2.5 oz (71.0 g) - Modes: solid, peloton, night flash, day flash - Lumens: 20 solid, 8 peloton, 29 night flash, 65 day flash - Battery life: 6 hours solid, 8 hours peloton, 6 hours night flash, 16 hours day flash - ANT+: Yes - BLE: Yes - Water rating: IPX7 - Viewing angle: 220° In the box: - Varia RTL515 - Mounting Kit - Cables - Documentation
Mount your Varia Rearview Radar or Varia Smart Bike Light (each sold separately) to an aero or round seat post with this quarter-turn mount. Includes mount, 2 fitting shims and 4 O-rings.
Wheel magnet for all CatEye cycle computers
Versatile and clever The Nyon is the perfect companion for embarking on your fully connected eBike experience. Nyon connects to your smartphone with the eBike Connect app and exchanges data about routes and activities. The color display serves as an intelligent guide when you are exploring new places and as your personal trainer by providing you with fitness data. The touch screen makes the all-in-one computer both intuitive and easy to use and is operated using the separate control unit during your ride. Whether you're using your eBike for long rides or short everyday trips, the robust, easy-to-read display ensures that you are ready for all requirements and weather conditions. The Nyon computer – for a smarter, more intuitive and connected generation. This is what Connected Biking feels like. Simple operation A convenient option: Nyon is intuitive to use thanks to the touch screen function and can be operated using the separate control unit during your ride. Award-winning design Impressive both inside and out: The 3.2-inch high-resolution color display combines smart functions with an elegant design that has won a Red Dot Design Award. Easy to read A clear view in any light: The display brightness and backlight automatically adapt to the ambient light. A special coating reduces glare and finger marks. You can choose between a dark and a bright display with maximum contrast. Individual screens Focus on the essential: You can customize the user interface of the display to suit your specific requirements. This gives you a clear view of the information that you need at all times. Always ready for action Whatever the weather: The touch screen of the robust display remains fully functional even when exposed to rain or dust and can be operated while wearing bike gloves. Savings Screen If you want to find out how much you could save by choosing to use your eBike instead of a car, check out the info on the new Savings Screen. This is activated in the screen management settings. You can also see a comparison of the current and previous weeks, or choose a different currency in the settings. Smart connectivity functions Perfectly connected: Nyon is part of an intelligently connected system and opens the door to the connected eBike World of Bosch thanks to the eBike Connect smartphone app and an online portal. Data synchronization Constant communication: As soon as Nyon connects to your smartphone or Wi-Fi, the computer connects to your eBike Connect account and automatically synchronizes the riding data. Choose your ideal position Optimum position: To ensure the best possible readability, the display mount has two installation positions. The center mounting position above the handlebar is designed to meet the needs of eMTB riders, while tour riders can place the mount further forward. One device, several users One for all: You can share your Nyon with friends or family – everyone can then synchronize their riding data with their own account. Software updates Always up-to-date: Software updates or new maps can be conveniently downloaded and installed over the air.
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin High Mount for a clean, flush look that securely holds your Garmin centered over the stem. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr Garmin Low Mount to add a Garmin GPS directly to the Blendr stem mount. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Garmin GPS - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Getting the correctly sized magnets means you're worrying about where the next coffee stop is, not if your computer is recording the ride. Key features: - Universal crank magnets work with any cadence sensor - Get the perfectly sized magnet, sized right for your bike and sensor - 20mm cadence magnet improves signal for wider gaps between crank and sensor
Bontrager's DuoTrap Digital Speed/Cadence Sensor pulls double duty for your ANT+ cycling computer. It wirelessly transmits speed and cadence data and fits directly into the chainstay of certain Trek bicycles for a clean look that installs in seconds.
Connect ANT+ and Bluetooth Smart devices to all of the data available from the DuoTrap S sensor for your on-the-bike wireless needs. • ANT+ 2.4 GHz and Bluetooth Smart wireless digital speed and cadence sensor • ANT+ and Bluetooth Smart allow simultaneous use of Trip 300 and smartphone • For use with many ANT+ and Bluetooth Smart wireless technology enabled devices • Includes Bontrager wheel magnet, crank cadence band, and CR2032 battery • Works with Trek DuoTrap compatible bikes
Page 1 of 8 Next page