Cables

- Vision Aero/reverse brake lever specific brake cable - Replacement cables that only work with Vision reverse brake levers - Sold individually

Get your cables under control. - Trek cable stops and guides - For specific compatibility concerns, please contact our Customer Service team

Integrates seamlessly into the frame.

For proper assembly. - Fits any Trek frame with open groove guide design - For specific compatibility concerns, please contact our Customer Service team

- Shimano, Y8JA98020, SM-BH90, Olive and connecting insert

Shimano Dura-Ace OT-SP41 Housing & Polymer Cable Derailleur Sets - Polymer-coated, stainless steel inner cable reduces the sliding resistance to achieve lighter and quicker operation and is rust resistant - OT-SP41 Housing is pre-lubricated with silicone grease - Sealed end caps to minimize dirt contamination - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed

Shimano Stainless Road/MTB Brake Cable & Housing Sets - 1 x 2000mm black 5mm housing - 1 x 1000mm and 1 x 2050mm 1.6mm stainless cables - 2 end caps and 2 cable crimps

These PTFE-coated, stainless steel cable and housing sets reduce the sliding resistance to achieve lighter and quicker operation. Includes: - 1400mm x 5mm housing x 1 - 800mm x 5mm housing x 1 - 2050mm x 1.6mm cable x 1 - 1000mm x 1.6mm cable x 1

Stainless steel cables are extruded to provide a smooth, low-friction surface.

London Mod cable adapter for routing dual cables.

Jagwire 4/5mm Wedge Type Housing or Hose Guide Bag of 50

Fittings for converting open loop housing holders on a frame to traditional cable stops. - Fits snugly inside open loop and receives 5mm housing with no end cap - Large flange for larger hydraulic loops - Flattened on one side to accommodate frame

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance. You get 10 of them for all your bicycle setup needs.

Jagwire's EZ Handle Single End Straddle Wire is a replacement straddle wire (also called a crossover or transverse cable) for cantilever brakes.

Jagwire's M10 Adjusting Barrel is a 10 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right replacement part for most mountain bike brake levers. It's made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

Jagwire's Sport Inline Adjusters are installed on your shift cable housing sections so that you can fine-tune the shift cable tension by hand (without tools). They're great for keeping your shifting dialed in. They're precision made of lightweight aluminum and nylon for easy use and durability. To install them, remove the cables and housing sections, cut the top housing sections in two and rejoin the sections with the Inline Adjusters in the middle.

Jagwire Sport Mineral Hydraulic Hose Kits feature a durable, flexible reinforced layer surrounding a low-friction inner tubing to deliver light brake lever action and trustworthy braking power. Offered as single hose kits for individual brakes or in bulk boxes for workshop use, Sport Mineral Hydraulic Hose is available for most popular road and mountain hydraulic disc brake systems that use mineral oil brake fluid. - High performance hydraulic hose provides effective braking power and control - Kits include hose and necessary fittings for one brake lever and caliper system - Contains 2000mm HPP hydraulic hose, needle insert, compression bushing, compression nut and seals for the listed compatible brake models - Compatible with Shimano Dura Ace (R9120, R9170), Ultegra (R8020, R8070), 105 (R7070), GRX (RX810, RX400), and similar brakes - For use with mineral oil brake systems only

Sport shift housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better shifting performance - Linear strand construction for compressionless performance - Appropriate for Teflon coated cables as well as steel and galvanized - 4.0mm outer diameter solid colors; 4.5mm OD braided colors - Length: 10m

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

Jagwire's Straddle Cables With Adjusters are for use on TRP Eurox and Paul Component Engineering cantilever brakes (brakes sold separately). The adjusters fit onto one brake arm and allow you to turn the rubber-coated ends of the adjusters to fine-tune your brake adjustment by tightening/loosening the Straddle Cables (included but not shown in the photo). You get 2 Straddle Cables and 2 Adjusters. - Rubber-coated white adjusting barrel - Compatible with TRP Eurox and Paul Component Engineering cantilever brakes - Allows for adjustment of link wire/brake - Includes two adjusters and two link wires

Rejuvenate the performance of your mountain or town brakes with this convenient and valuable cable. - Rejuvenate the performance of your brakes with this convenient and valuable cable - Extra-long 2750mm length ensures fitment for any application - Compatible with most non-hydraulic mountain bike and city brake systems - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap

Rejuvenate the performance of your road brakes with this convenient and valuable cable. - Rejuvenate the performance of your brakes with this convenient and valuable cable - Extra-long 2750mm length ensures fitment for any application - Compatible with road brake systems - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap

Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Rejuvenate the performance of your drivetrain with this convenient and valuable cable. - Extra-long 3100mm length ensures fitment for any application - Compatible with Shimano and SRAM drivetrains - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap

Upgrade the performance of your brakes with this convenient kit that includes all parts needed for smooth and reliable performance. - This smooth and reliable kit is a great performance upgrade for your bike - Compatible with nearly all braking systems - Low-friction cables are 2300mm and 1700mm long, for front and rear brakes - Black compressionless housing comes pre-lubed is 3000mm long - Kit includes Elite brake ferrules, frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched

Upgrade the performance of your drivetrain with this convenient kit that includes all parts needed for smooth and reliable performance. - This smooth and reliable kit is a great performance upgrade for your bike; - Compatible with Shimano and SRAM drivetrains - Low-friction cables are both 2300mm long, for front and rear shifting - Black compressionless housing comes pre-lubed is 3200mm long - Kit includes shift ferrules, frame protectors, and cable end caps - Included stainless steel cables are rust-proof and come pre-stretched

Spiral cable wrap manages those messy cables to achieve a sleek clean look while protecting shifting, braking, and electronic bike cables and hoses.

Genuine replacement parts All the parts you need to keep your Boone fresh. For proper assembly. - For 2014-2018 Boone - For specific compatibility concerns, please contact our Customer Service team

Genuine replacement parts Keep your bike safe and operating as it should. Keeps your cables and housing under control. - Replaces any 5mm X 28.6mm headset spacer to improve cable housing management - Compatible with threadless forks only

Genuine replacement parts Original Trek Fetch+ 4 cable guides Original Fetch+ 4 repair part - Set of 2 cable guides (Left + Right) - To guide cables around the steerer tube

Genuine replacement parts For optimal functionality. Replacement steer cable mount for your cargo bike. - Mounts front brake cable - Fastener kit not included

Genuine replacement parts For proper assembly. For optimal integration. - 10 pack - For 22.2 - 31.8mm handlebars

Genuine replacement parts Securely holds hub motor power cable in place. Original equipment replacement parts for your ride. - See your bike's specific product page for compatibility - Includes mounting hardware

Get your cables under control. - Designed for use on Top Fuel 29 2020-2021 - Reversible to meet cable routing differences in Rock Shox vs. Fox shocks

For proper assembly. - Compatible with 2015-2017 Emonda SLR - Trek cable stops and guides

For proper assembly. - Original equipment replacement downtube covers for Trek Madone 9 Series frames - Not compatible with other bikes

Hydraulic hose with banjo fitting for TRP brakes.

Hydraulic hose with banjo fitting for TRP brakes.

- Brake housing for polymer coated brake cables - Refer to Documents and links to find the right product

- Disc brake hose for all hydraulic Shimano disc brakes with straight connection type. Length 2000mm, outer diameter approx. 5mm. - Compatible brake levers: BL-T615, ST-M4050, BL-M506, BL-M505, BL-M445, BL-M396, BL-M395, BL-M355 - Compatible brake caliper: BR-T615, BR-M4050, BR-M447, BR-M446, BR-M395, BR-M355 - Also compatible ST-RS785 and ST-RS685 road hydraulic levers with BR-RS785 or BR-RS805 calipers - Straight connection at lever and caliper

Shimano Dura-Ace BC-9000 Polymer Road Brake Cable & Housing sets reduce the sliding resistance to achieve lighter and quicker operation. - Dura-Ace grade SLR-EV Road brake cable set - Stainless steel for anti-rust protection - Low friction polymer material on the cable may cause slippage at the cable fixing bolt after initial pre-stretch for the cable is performed. Fur-like material from polymer coating will not affect the performance - Pre-lubed with special polymer compatible grease

Shimano E-Tube wires and connectors - Frame grommets for E-tube internal-wiring compatible frames are sold separately, see Shimano Frame Grommet Kit Electronic Shifter Extra Parts - Ultegra Di2 wires utilize Shimano's e-tube technology; e-tube is a two-prong system and is NOT cross compatible with Dura-Ace 7970 Di2 wiring - All e-tube wires may be used for internal or external applications

Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths. Compact design makes new electric components smaller and lighter EP8 EP800 Series

Shimano EW-SD300 Di2 eTube Wire for external routing is available in a variety of lengths. - Compact design makes new electric components smaller and lighter - EP8 EP800 Series

- 1.2 mm x 2100 mm (1 pc.) - 1.2 mm x 1800 mm (1 pc.) - OPTISLICK - Stainless steel - Outer cap with short tongue for ST (2 pcs.) - SIS-SP40 outer caps (3 pcs.) - SIS-SP40 sealed outer caps (1 pc.) - Inner end caps (2 pcs.) - OT-SP41 1700 mm - OT-RS900 (1 pc.)

Shimano, SLR brake housing, 40m, Black

Shimano SM-BH90 disc brake hose and hose kits offer solutions for your brake hose and connection requirements. OEM hose kit for Dura-Ace BR-R9170 disc brakes

Shimano SM-BH90 disc brake hose and hose kits offer solutions for your brake hose and connection requirements. OEM hose Kit for Deore BR-M615 disc brakes

Shimano SM-PCE02 link cable for e-tube and Di2 systems.

- Wet or muddy condition cable sealing solution - 4/6mm

Shimano Stainless Derailleur Cables Cable Head: Shimano/SRAM Cable Type: Stainless Defined Color: Gray Diameter: 1.2mm Double Ended: No Length: 3000 mm Quantity Included: 1

- Brake casing has internal lining and external plastic coating - Derailleur casing is compressionless with internal lining and external plastic coating

- Brake casing has internal lining and external plastic coating - Length: 30m

- Aluminum cable-end crimps for derailleur or brake applications to prevent fraying after the final cut

Keep your cable housing and brake hose securely in place with these simple and easy-to-use clips. - Center-rotating, dual-line hooks secure cable housing and hydraulic tubing by simply snapping onto the hose or housing - Sold in a pack of 4

- Complete ferrule and cable end kit - Includes: Shift 4.0mm (Qty10), Brake 5.0mm (Qty 6), Cable Tip (Qty 4) - Material: Aluminum

SRAM ferrules for keeping the cable housing aligned. - 100 count jar

SRAM's Guide Hydraulic Line Kit is a replacement hose kit for all Guide brakes. - Compatible with SRAM Guide R, RS, RSC, and DB5 brakes - Length: 2000mm

SRAM's Inline Barrel Adjusters are placed on your brake cables near the handlebars so that you can turn the adjusters to fine-tune your braking. They feature durable and light aluminum/composite construction with rubber covers for easy operation.

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.