Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Other

Once you find the part you need, order it for shop pick up and call the service department to set up installation.

absoluteBLACK Integrated Headset Top Cap and Bolt
$19.99
The absoluteBLACK integrated headset top cap is a one-piece top cap and bolt with a 5mm hex socket. It is designed to fit every standard starnut. - One-piece design is lightweight (only 4g) - Not suitable for "expanding" star nuts with a steel coil spring - Compatible with the ENVE compression plug
Wolf Tooth Precision Knock Block Headset Spacer
$9.95
Wolf Tooth Headset Spacers for Trek Knock Block are machined in the USA out of aircraft grade aluminum. - Compatible with Trek Knock Block system - These spacers have unique raised features that key to Knock Block compatible stems (made by Bontrager) - 1 1/8" top (straight 1 1/8" or 1 1/8" to 1 1/2" taper) steerer tubes only
Wolf Tooth ReMote Light Action Dropper Lever
$69.95
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts’ stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength. - Upfront cable fixing - Large diameter ball bearing - Cable-kind clamp - Low-profile, light action - Integrated cable adjust - Breakaway axle pivot - High-traction lever - Broad compatibility
Wheels Manufacturing Aluminum Headset Spacer
$3.00 - $24.95
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be. - Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size
Wheels Manufacturing Ball Bearing Retainer
$10.45 - $20.48
Grade 300 retainer bearings for headset and bottom bracket service. - 10 Retainers/Bag
Wheels Manufacturing Carbon Fiber Headset Spacer 1-1/8-inch x 10mm
$5.00
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 10mm spacer
Wheels Manufacturing Carbon Fiber Headset Spacer 1-1/8-inch x 15mm
$6.00
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes one (1) 1-1/8" x 15mm spacer
Wheels Manufacturing Carbon Fiber Headset Spacers 1-1/8-inch
$6.83 - $13.13
Carbon fiber headset stack spacers, precision-cut to ensure proper headset function. - Compatible with all threadless and threaded headsets
Wheels Manufacturing Carbon Fiber Headset Spacers 1-1/8-inch x 5mm Bag of 5
$2.99
- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 5mm spacers
Wheels Manufacturing Derailleur Hanger 104
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 108
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 14
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws
Wheels Manufacturing Derailleur Hanger 159
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Screws
Wheels Manufacturing Derailleur Hanger 200
$65.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish Notes: - Post on this hanger is 16.5mm (.650) in length with an M12 x 1.25 thread. Please check your hanger before ordering to make sure this is a match. - Trek recommends that you apply a removable thread-locker such as LOCTITE 243 to the threads during re-assembly. Failure to do so may result in fasteners loosening during use.
Wheels Manufacturing Derailleur Hanger 24
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 288
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish
Wheels Manufacturing Derailleur Hanger 307
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. - CNC machined 6061 aluminum -Black anodized finish - For M12x1.75 Thru Axle - Replaces Niner Part #28-012-12-00-20
Wheels Manufacturing Derailleur Hanger 37
$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 38
$28.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 40
$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 45
$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 6
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Derailleur Hanger 61
$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws Notes: - PLEASE NOTE! M4 HOLES ON HANGER ARE NOT THREADED! - FRAMES USING THIS HANGER HAVE THREADS IN DROPOUT!
Wheels Manufacturing Derailleur Hanger 67
$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt
Wheels Manufacturing Enduro 6806/29 (DUB Compatible) ABEC-3 Sealed Bearings, Bag of 2
$55.17
Replacement Enduro 6806/29 ABEC-3 sealed bearings for Wheels Mfg DUB Compatible bottom brackets. - Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Kyodo Yushi SRL grease or equivalent - Imported - Sold as Bag of 2
Wheels Manufacturing Front Derailleur Spacer 1-1/8-inch
$10.45
This Wheels Manufacturing Shim lets you mount a 1-1/8-inch clamp front derailleur on a 1-inch seat tube.
Wheels Manufacturing Grade 300 Loose Ball Bearings
$16.00 - $22.05
Loose ball bearings to fit many brands of hubs, headsets, and bottom brackets. Grade 300 — Ultegra level quality.
Wheels Manufacturing Loose Ball Bearings
$0.05 - $0.15
- High roundness grade 300 balls in a shop dispenser bottle - 1/8-inch, 500/bottle - 7/32-inch, 500/bottle
Wheels Manufacturing Repair Pack for 22/24mm (SRAM GPX) Bottom Brackets
$21.00
Replacement spacer pack for Wheels Mfg. 22/24mm (SRAM GXP) bottom brackets. Bearings sold separately. Pack Includes: - (1) - Silicone Dust Seal, 24mm ID Drive Side - (1) - Silicone Dust Seal, 22mm ID Non-drive Side - (1) - 24MM Wave Washer - (2) - 0.5mm, 24mm ID Crank Spindle Spacer - (2) - 1.0mm, 24mm ID Crank Spindle Spacer
TruVativ Steel Chainring Bolt Set
$9.00
- Use without washers for two chainrings, with washers for one DH ring - Bolts and nuts use hex keys - Includes 15 pieces total; 5 nuts, 5 bolts, 5 washers - Length: 8mm - Material: Steel - Type: Hex
Page 1 of 36 Next page