Filter By:
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts & Accessories
$3.93
$15.99
75% Off
Upgrade or refresh your Bontrager pedals.
- Original equipment replacement parts for Bontrager Line Pro Pedals
- Replacement Pin Kit includes 20 Line pins and washers
$5.93
$23.99
75% Off
Upgrade or refresh your Bontrager pedals.
- Original equipment replacement parts for Bontrager Line Pro Pedals
- Axle rebuild kit includes bearings, bushings, and seals for a pair of pedals
Genuine replacement parts
- When it's time to refresh your trusty pedals, Trek Genuine Replacement Parts have you covered.
$6.99
Features
• Molded cleat position indicators for easy alignment
• Extra leverage to prevent cleats from twisting during installation
• For Crankbrothers pedal users, includes four tread depth gauges for quick cleat shim and pedal setup
• Crafted with 67% post-consumer recycled material
• Compatible with Crankbrothers, SPD, and Time ATAC cleats
• Molded cleat position indicators for easy alignment
• Extra leverage to prevent cleats from twisting during installation
• For Crankbrothers pedal users, includes four tread depth gauges for quick cleat shim and pedal setup
• Crafted with 67% post-consumer recycled material
• Compatible with Crankbrothers, SPD, and Time ATAC cleats
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
$10.00
Eliminate cleat wear and improve walking comfort and safety with these Exustar cleat covers.
- Compatible with Exustar cleat C01, C03, and C05
- Durable and flexible rubber
- Can be used with either floating or fixed position cleats
- Weight of only 14 grams/pair
$10.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs
$11.00
Dimension Mini Toe Clips
- Toe clips do not accept toe straps
- Sold as a pair
- Mounting hardware for the toe-clip is included
$11.00
Dimension Toe Clips and Straps Set.
Includes:
- 4 bolts
- 4 nuts (washers included)
- 2 nylon toe straps
- 2 toe clips
$11.99
Crank Brothers' 5050 Pin Kit includes 40 8mm-long steel pins that let you customize the traction on your 5050 or Mallet pedals. Thread lock is pre-applied to every pin.
$13.00
The DELTA standard requires a rotational movement of the foot toward the outside or inside for disengagement. This function improves cyclist's safety; no body or bearing prevents disengagement toward the inside. Compatible with non-KEO LOOK pedals, their contact area is wide for optimal comfort. They also feature a memory positioner to aid when changing cleats.
- Use: Road & Indoor Bike
- Material: Polyacetal + PTFE
- Lateral adjustment: 4mm
- Longitudinal adjustment: 12mm
- Weight (pair + fasteners): 75g
$13.99
Genuine replacement parts for your Trek pedals.
- Original equipment replacement parts for Trek Line Elite Pedals
- Replacement Pin Kit includes 20 Line pins and nuts
$14.00
Nano/AirRebuild Rebuild Kit - AN01/AN06/AN14SA
$14.95
Cleat screws are intended for proper installation of the Cleat Wedge. Designed to withstand high torque levels, creating a secure and reliable connection between the rider and the bike. Available in different lengths and styles to fit most pedal systems.
- 10mm SPD/MTB compatible cleat screws
- 4mm Hex countersunk M5x0.8
- Compatible with most 2-hole cleats
- Black oxide-coated carbon steel
- 25 pieces
$15.00
The KEO cleat covers are designed to protect your KEO cleats while walking. Compatible with KEO GRIP and KEO CLEAT, these covers lengthen the life of your cleats and improve safety when walking thanks to an anti-slip surface.
- Compatibility: KEO Grip/KEO Cleat
- Use: Protect the cleat
$16.00
The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.
$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
$17.10 - $31.50
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.
$17.99
Genuine replacement parts for your Trek pedals.
- Original equipment replacement parts for Trek and Bontrager Line Pro Pedals
- Replacement Pin Kit includes 20 Line pins and washers
- Original equipment replacement parts for Trek and Bontrager Line Pro Pedals
- Replacement Pin Kit includes 20 Line pins and washers
$18.00
Features
• Features HT PRO cleat system
• Cleat Weight (pair): 64g
• Body Material: Steel
• Cleat System: HT exclusive system / 4° lateral floating / multi-release cleats allowing your shoe to be disengaged by rolling or twisting the foot in any direction
• Features HT PRO cleat system
• Cleat Weight (pair): 64g
• Body Material: Steel
• Cleat System: HT exclusive system / 4° lateral floating / multi-release cleats allowing your shoe to be disengaged by rolling or twisting the foot in any direction
$18.99
Get that fresh cleat feel
These solidly-built cleats work with Bontrager road pedals or any Look Cycle’s KÉO-compatible clipless pedals.
Whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit.
Product details
- Replacement cleats for all Look Cycle’s KÉO®-compatible road pedals
- Directly compatible with Bontrager Comp Road pedals
- Set includes 1 pair
$19.99
- Strapless design is easy to engage without fully committing to the pedal
- No special shoes required
- Improves pedaling efficiency
- Molded from unbreakable nylon
- Please make sure your pedals have visible mounting points or a removable reflector for mounting prior to purchase
- Includes mounting hardware. Note: metal plate may not be required during installation.
$19.99
Features
• Compatible with Look Delta System
• Engineering thermoplastic injection body
• Fixed position
• One pair on header card
• Compatible with Look Delta System
• Engineering thermoplastic injection body
• Fixed position
• One pair on header card
$19.99
Make all of your two-bolt shoes MSW-friendly, with replacement cleat kits.
- Ideal for riders who are new to clipless pedals or just tend to clip in and out a lot
- Multi-release cleats clip out at multiple angles for worry-free disengagement
- Compatible with most SPD-style pedals
- 4° of float both inward and outward
- Tools needed: 4mm Allen wrench and grease
$19.99
A set of durable, SPD-compatible replacement cleats that come with all mounting hardware.
- Compatible with all 2-bolt SPD-style pedals
- Includes mounting hardware
- Set includes 1 pair
Get that fresh cleat feel
- Whether you're looking for replacements, need a new set for a new pair of kicks, or just like to keep an extra pair in your toolkit.
$20.99
- Set of 44 total replacement steel pins for vault pedals
- Run threads-out for maximum traction or flip the pins to heads-out for less grip
- 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm
- 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm
- Use either a 5mm spanner or the included 2mm hex wrench to secure/remove
Page 1 of 3
Next page